前言
本文从实际场景出发记录了openGauss，CM，OM整体编译流程，用户只需要选取干净的CentOS 7.6环境，配置好yum源，即可按照文中操作。
一、 编译openGauss
1. 下载源码及依赖环境
- 安装依赖包
[root@ecs-lee ~]# yum install git libaio-devel flex bison ncurses-devel glibc-devel patch lsb_release readline-devel -y
- 下载源码
[root@ecs-lee lee]# git clone https://gitee.com/opengauss/openGauss-server.git Cloning into 'openGauss-server'... remote: Enumerating objects: 65231, done. remote: Counting objects: 100% (19426/19426), done. remote: Compressing objects: 100% (7501/7501), done. remote: Total 65231 (delta 13941), reused 15163 (delta 11811), pack-reused 45805 Receiving objects: 100% (65231/65231), 202.18 MiB | 1.41 MiB/s, done. Resolving deltas: 100% (45609/45609), done.
- 下载三方库
[root@ecs-lee openGauss-server]# wget https://opengauss.obs.cn-south-1.myhuaweicloud.com/latest/binarylibs/openGauss-third_party_binarylibs_Centos7.6_x86_64.tar.gz --2022-09-18 18:47:11-- https://opengauss.obs.cn-south-1.myhuaweicloud.com/latest/binarylibs/openGauss-third_party_binarylibs_Centos7.6_x86_64.tar.gz Resolving opengauss.obs.cn-south-1.myhuaweicloud.com (opengauss.obs.cn-south-1.myhuaweicloud.com)... 139.159.208.230, 121.37.63.33, 121.37.63.38, ... Connecting to opengauss.obs.cn-south-1.myhuaweicloud.com (opengauss.obs.cn-south-1.myhuaweicloud.com)|139.159.208.230|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 872769145 (832M) [application/gzip] Saving to: ‘openGauss-third_party_binarylibs_Centos7.6_x86_64.tar.gz’ 100%[=====================================================================================================================================================================================================================================>] 872,769,145 1.27MB/s in 10m 35s 2022-09-18 18:57:46 (1.31 MB/s) - ‘openGauss-third_party_binarylibs_Centos7.6_x86_64.tar.gz’ saved [872769145/872769145]
- 解压
[root@ecs-lee openGauss-server]# tar -xf openGauss-third_party_binarylibs_Centos7.6_x86_64.tar.gz [root@ecs-lee openGauss-server]# ls aclocal.m4 cmake config.sh contrib dependency.xml doc GNUmakefile.in License openGauss-third_party_binarylibs_Centos7.6_x86_64 README.md Third_Party_Open_Source_Software_Notice build CMakeLists.txt configure CONTRIBUTING.md distribute_errmsg.txt docker GNUmakefile.in_for_llt liteom openGauss-third_party_binarylibs_Centos7.6_x86_64.tar.gz simpleInstall Tools build.sh config configure.in COPYRIGHT distribute_escan.txt escan.txt hw_partition_interval_exchange.out Makefile README.en.md src [root@ecs-lee openGauss-server]# mv openGauss-third_party_binarylibs_Centos7.6_x86_64 binarylibs
2. 编译代码解读
[root@ecs-lee openGauss-server]# tree build build └── script ├── aarch64_lite_list ├── aarch64_opengauss_list ├── build_opengauss.sh ├── cmake_package_mini.sh ├── gaussdb.ver ├── make_win_odbc_vs2010.bat ├── opengauss_config_file_mini ├── opengauss_release_list_mini ├── opengauss_release_list_ubuntu_single ├── package_opengauss.sh ├── separate_debug_information.sh ├── utils │ ├── cmake_compile.sh │ ├── common.sh │ ├── internal_packages_lite.sh │ ├── internal_packages.sh │ └── make_compile.sh ├── x86_64_lite_list └── x86_64_opengauss_list 2 directories, 18 files [root@ecs-lee openGauss-server]# ls -lrt total 853988 drwxrwxr-x 5 mogdb mogdb 4096 Sep 15 14:57 binarylibs -rw-r--r-- 1 root root 872769145 Sep 16 20:00 openGauss-third_party_binarylibs_Centos7.6_x86_64.tar.gz -rw-r--r-- 1 root root 2834 Sep 18 18:43 COPYRIGHT -rw-r--r-- 1 root root 2402 Sep 18 18:43 CONTRIBUTING.md -rwxr-xr-x 1 root root 3692 Sep 18 18:43 CMakeLists.txt -rw-r--r-- 1 root root 26170 Sep 18 18:43 README.md -rw-r--r-- 1 root root 27611 Sep 18 18:43 README.en.md -rw-r--r-- 1 root root 1488 Sep 18 18:43 Makefile -rw-r--r-- 1 root root 9216 Sep 18 18:43 License -rw-r--r-- 1 root root 4950 Sep 18 18:43 GNUmakefile.in_for_llt -rw-r--r-- 1 root root 7758 Sep 18 18:43 GNUmakefile.in drwxr-xr-x 3 root root 4096 Sep 18 18:43 Tools -rw-r--r-- 1 root root 419527 Sep 18 18:43 Third_Party_Open_Source_Software_Notice -rwxr-xr-x 1 root root 3290 Sep 18 18:43 build.sh drwxr-xr-x 3 root root 4096 Sep 18 18:43 build -rw-r--r-- 1 root root 385 Sep 18 18:43 aclocal.m4 -rw-r--r-- 1 root root 168 Sep 18 18:43 config.sh drwxr-xr-x 3 root root 4096 Sep 18 18:43 cmake drwxr-xr-x 2 root root 4096 Sep 18 18:43 config -rw-r--r-- 1 root root 65000 Sep 18 18:43 configure.in -rwxr-xr-x 1 root root 870365 Sep 18 18:43 configure -rw-r--r-- 1 root root 0 Sep 18 18:43 distribute_escan.txt -rw-r--r-- 1 root root 97509 Sep 18 18:43 distribute_errmsg.txt -rw-r--r-- 1 root root 2277 Sep 18 18:43 dependency.xml drwxr-xr-x 66 root root 4096 Sep 18 18:43 contrib drwxr-xr-x 3 root root 4096 Sep 18 18:43 doc drwxr-xr-x 3 root root 4096 Sep 18 18:43 docker -rw-r--r-- 1 root root 13171 Sep 18 18:43 hw_partition_interval_exchange.out -rw-r--r-- 1 root root 68486 Sep 18 18:43 escan.txt drwxr-xr-x 2 root root 4096 Sep 18 18:43 simpleInstall drwxr-xr-x 2 root root 4096 Sep 18 18:43 liteom drwxr-xr-x 10 root root 4096 Sep 18 18:43 src
3. 编译参数解读
[root@ecs-lee openGauss-server]# ./build.sh --help Usage: ./build.sh [OPTION] -h|--help show help information -m|--version_mode this values of paramenter is debug, release, memcheck or mini, the default value is release -3rd|--binarylib_dir the parent directory of binarylibs -pkg|--package (deprecated option)package the project,by default, only compile the project -wrap|--wrap_binaries wrop up the project binaries. By default, only compile the project -nopt|--not_optimized on kunpeng platform, like 1616 version, without LSE optimized -f|--config_file set postgresql.conf.sample from config_file when packing
4. 编译代码
[root@node1 openGauss-server]# nohup sh build.sh -m release -pkg -3rd /root/binarylibs/ & [1] 20852 [root@node1 openGauss-server]# nohup: ignoring input and appending output to ‘nohup.out’ [root@node1 openGauss-server]# [root@node1 openGauss-server]# [root@node1 openGauss-server]# [root@node1 openGauss-server]# [root@node1 openGauss-server]# [1]+ Done nohup sh build.sh -m release -pkg -3rd /root/binarylibs/ [root@node1 openGauss-server]# cat nohup.out ROOT_DIR : /root/openGauss-server [makegaussdb] 22-09-25 19:32:58: script dir : /root/openGauss-server/build/script [makegaussdb] 22-09-25 19:32:58: Work root dir : /root/openGauss-server ... ... openGauss installation complete. now, all build has finished! [makegaussdb] 22-09-25 19:40:09: script dir : /root/openGauss-server/build/script [makegaussdb] 22-09-25 19:40:09: Work root dir : /root/openGauss-server Start package opengauss. ./separate_debug_information.sh: line 13: lsb_release: command not found entry.py is a script, do not separate symbol ... ... Begin package server /root/openGauss-server/mppdb_temp_install make server(all) package success! packaging libpq... success! packaging tools... success! Begin to install upgrade_sql files... Successfully packaged upgrade_sql files. End package opengauss. now, all packages has finished!
- 打包文件
[root@node1 openGauss-server]# ls -lrt output/ total 425664 -rwxr-xr-x. 1 root root 336276142 Sep 25 19:41 openGauss-3.1.0-CentOS-64bit-symbol.tar.gz -rw-r--r--. 1 root root 86018592 Sep 25 19:41 openGauss-3.1.0-CentOS-64bit.tar.bz2 -rw-r--r--. 1 root root 65 Sep 25 19:41 openGauss-3.1.0-CentOS-64bit.sha256 -rw-r--r--. 1 root root 5083721 Sep 25 19:41 openGauss-3.1.0-CentOS-64bit-Libpq.tar.gz -rw-r--r--. 1 root root 8015868 Sep 25 19:41 openGauss-3.1.0-CentOS-64bit-tools.tar.gz -rw-------. 1 root root 467678 Sep 25 19:41 upgrade_sql.tar.gz -rw-------. 1 root root 65 Sep 25 19:41 upgrade_sql.sha256
二、编译OM
1. clone 代码
[root@node1 ~]# git clone https://gitee.com/opengauss/openGauss-OM.git Cloning into 'openGauss-OM'... remote: Enumerating objects: 3925, done. remote: Counting objects: 100% (1541/1541), done. remote: Compressing objects: 100% (1069/1069), done. remote: Total 3925 (delta 975), reused 794 (delta 467), pack-reused 2384 Receiving objects: 100% (3925/3925), 2.48 MiB | 0 bytes/s, done. Resolving deltas: 100% (2551/2551), done.
2. 帮助
[root@node1 ~]# cd openGauss-OM/ [root@node1 openGauss-OM]# ls build build.sh LICENSE other README.en.md README.md script simpleInstall [root@node1 openGauss-OM]# sh build.sh --help ROOT_DIR : /root/openGauss-OM Usage: build.sh [OPTION] -h|--help show help information -3rd|--binarylib_dir the parent directory of binarylibs
3. 编译
./build.sh --help or ./build.sh -h [root@node1 openGauss-OM]# sh build.sh -3rd /root/binarylibs ROOT_DIR : /root/openGauss-OM Everything is ready. success!
4. 查看文件
[root@node1 openGauss-OM]# ls build build.log build.sh LICENSE other package README.en.md README.md script simpleInstall [root@node1 openGauss-OM]# ls -lrt package/ total 11664 -rw-r--r--. 1 root root 11939685 Sep 25 19:45 openGauss-3.1.0-CentOS-64bit-om.tar.gz -rw-r--r--. 1 root root 65 Sep 25 19:45 openGauss-3.1.0-CentOS-64bit-om.sha256
三、编译CM
1. 编译Cmake
- 安装依赖包
[root@node1 script]# yum install gcc-c++
- 下载Cmake
[root@node1 ~]# wget https://github.com/Kitware/CMake/releases/download/v3.14.1/cmake-3.14.1.tar.gz 100%[==================================================================================================>] 8,849,712 5.19MB/s in 1.6s 2022-09-25 19:52:02 (5.19 MB/s) - ‘cmake-3.14.1.tar.gz’ saved [8849712/8849712] [root@node1 ~]# tar xvf cmake-3.14.1.tar.gz && cd cmake-3.14.1/ [root@node1 ~]# ./bootstrap && gmake && gmake install [root@node1 ~]# /usr/local/bin/cmake --version [root@node1 ~]# ln -s /usr/local/bin/cmake /usr/bin/
2. clone 代码
[root@node1 ~]# git clone https://gitee.com/opengauss/CM.git Cloning into 'CM'... remote: Enumerating objects: 809, done. remote: Counting objects: 100% (809/809), done. remote: Compressing objects: 100% (545/545), done. remote: Total 809 (delta 379), reused 605 (delta 246), pack-reused 0 Receiving objects: 100% (809/809), 1.14 MiB | 0 bytes/s, done. Resolving deltas: 100% (379/379), done.
3. 帮助
[root@node1 CM]# sh build.sh --help /root/CM/build/build.sh [-m {release|debug|memcheck|cov}] [-3rd ${THIRD_BINARY_PATH}] [-o ${OUTPUT_PATH}] [--pkg] [--single] default: /root/CM/build/build.sh -m release -3rd "/root/CM/binarylibs" -o "/root/CM/output"
4. 编译
[root@node1 CM]# sh build.sh -m release -3rd "/root/binarylibs" --pkg gcc set to 3rd path:[/root/binarylibs/buildtools/gcc7.3/]! We well get dcc lib from 3rd[/root/binarylibs/kernel/component/dcc]. clean dcc libs[/root/CM/common_lib/dcc/] ******************************************************************** start build CM with <release> project_root_path=[/root/CM] 3rd=[/root/binarylibs] gcc=[7.3] pkg=[yes] etcd=[OFF] hotpatch=[OFF] libpq=[ON] krb=[OFF] multiple_nodes=[OFF] cmake_def=[-DCMAKE_INSTALL_PREFIX=/root/CM/output -DENABLE_PRIVATEGAUSS=OFF -DCMAKE_BUILD_TYPE=Release -DENABLE_MULTIPLE_NODES=OFF -DENABLE_ETCD=OFF -DENABLE_HOTPATCH=OFF -DENABLE_LIBPQ=ON -DENABLE_KRB=OFF -DENABLE_ALARM=ON] tmp_build_dir=[/root/CM/dist] pkg_name=[Package_ddes_cm_release.tar.gz] output to [/root/CM/output]. ... -- Installing: /root/CM/output/bin/cm_ctl -- Installing: /root/CM/output/bin/om_monitor -- Installing: /root/CM/output/bin/cm_server -- Installing: /root/CM/output/share/config/cm_server.conf.sample alarmConfig.conf is a config file, do not separate symbol alarmItem.conf is a config file, do not separate symbol Seperate debug symbol from cm_agent to /root/CM/output/symbols/bin/cm_agent.symbol ..... OK Seperate debug symbol from cm_ctl to /root/CM/output/symbols/bin/cm_ctl00.symbol ..... OK Seperate debug symbol from cm_server to /root/CM/output/symbols/bin/cm_server000.symbol ..... OK Seperate debug symbol from om_monitor to /root/CM/output/symbols/bin/om_monitor00.symbol ..... OK libcjson.so is a link, do not separate symbol! libcjson.so.1 is a link, do not separate symbol! Seperate debug symbol from libcjson.so.1.7.15 to /root/CM/output/symbols/lib/libcjson.so.1.7.1500.symbol ..... OK libcrypto.so is a link, do not separate symbol! Seperate debug symbol from libcrypto.so.1.1 to /root/CM/output/symbols/lib/libcrypto.so.1.1.symbol ..... OK Seperate debug symbol from libdcc_driver.so to /root/CM/output/symbols/lib/libdcc_driver.so.symbol ..... OK Seperate debug symbol from libdcc.so to /root/CM/output/symbols/lib/libdcc.so000.symbol ..... OK Seperate debug symbol from libdcf.so to /root/CM/output/symbols/lib/libdcf.so000.symbol ..... OK Seperate debug symbol from libgstor.so to /root/CM/output/symbols/lib/libgstor.so0.symbol ..... OK Seperate debug symbol from liblz4.so to /root/CM/output/symbols/lib/liblz4.so000.symbol ..... OK Seperate debug symbol from liblz4.so.1 to /root/CM/output/symbols/lib/liblz4.so.10.symbol ..... OK Seperate debug symbol from liblz4.so.1.9.3 to /root/CM/output/symbols/lib/liblz4.so.1.9.30.symbol ..... OK libssl.so is a link, do not separate symbol! Seperate debug symbol from libssl.so.1.1 to /root/CM/output/symbols/lib/libssl.so.1.1000.symbol ..... OK libz.so is a link, do not separate symbol! libz.so.1 is a link, do not separate symbol! Seperate debug symbol from libz.so.1.2.12 to /root/CM/output/symbols/lib/libz.so.1.2.1200.symbol ..... OK libzstd.so is a link, do not separate symbol! libzstd.so.1 is a link, do not separate symbol! Seperate debug symbol from libzstd.so.1.5.2 to /root/CM/output/symbols/lib/libzstd.so.1.5.2.symbol ..... OK pkg cm start ALL SUCCESS!!!!
5. 查看文件
[root@node1 CM]# ls -lrt output/ total 26728 -rw-r--r--. 1 root root 6370191 Sep 25 20:03 Package_ddes_cm.tar.gz -rw-r--r--. 1 root root 20993040 Sep 25 20:03 Symbols_ddes_cm.tar.gz
总结
文中所获得的安装包打包在一起即可获得最新版本的安装包
