内向_个人页

Reftp客户端连接不上ftp服务器？ 端口21是打开的。 ------------ netstat -na命令，输出如下： login as: root root@182.92.197.238's password: Last login: Thu Dec 10 14:10:08 2015 from 111.113.22.138 Welcome to aliyun Elastic Compute Service! [root@iZ25p3ad0ffZ ~]# netstat -na Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address               Foreign Address             Stat                                                                                        e tcp        0      0 0.0.0.0:80                  0.0.0.0:*                   LIST                                                                                        EN tcp        0      0 0.0.0.0:21                  0.0.0.0:*                   LIST                                                                                        EN tcp        0      0 0.0.0.0:22                  0.0.0.0:*                   LIST                                                                                        EN tcp        0      0 0.0.0.0:8888                0.0.0.0:*                   LIST                                                                                        EN tcp        0      0 127.0.0.1:8005              0.0.0.0:*                   LIST                                                                                        EN ………… [root@iZ25p3ad0ffZ ~]#   ------------------------- 回 2楼龙吟风的帖子 服务器内是可以登录的。 ------------------- [root@iZ25p3ad0ffZ ~]# lftp gzh:gzh1208@localhost lftp gzh@localhost:~> ------------------------- 回 4楼龙吟风的帖子 1、端口21，已经是打开的，提问帖子里就已经列出来的。 vsftpd服务也已经启动。 2、都说要看vsftpd配置文件啥的，请问要配置啥？ 我只是创建一个用户访问ftp服务器而已，还需要配置什么？ ---------------- 完整的配置文件如下： # Example config file /etc/vsftpd/vsftpd.conf # # The default compiled in settings are fairly paranoid. This sample file # loosens things up a bit, to make the ftp daemon more usable. # Please see vsftpd.conf.5 for all compiled in defaults. # # READ THIS: This example file is NOT an exhaustive list of vsftpd options. # Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's # capabilities. # # Allow anonymous FTP? (Beware - allowed by default if you comment this out). anonymous_enable=NO # # Uncomment this to allow local users to log in. local_enable=YES # # Uncomment this to enable any form of FTP write command. write_enable=YES # # Default umask for local users is 077. You may wish to change this to 022, # if your users expect that (022 is used by most other ftpd's) local_umask=022 # # Uncomment this to allow the anonymous FTP user to upload files. This only # has an effect if the above global write enable is activated. Also, you will # obviously need to create a directory writable by the FTP user. anon_upload_enable=NO # # Uncomment this if you want the anonymous FTP user to be able to create # new directories. anon_mkdir_write_enable=NO # # Activate directory messages - messages given to remote users when they # go into a certain directory. dirmessage_enable=YES # # Activate logging of uploads/downloads. xferlog_enable=YES # # Make sure PORT transfer connections originate from port 20 (ftp-data). connect_from_port_20=YES # # If you want, you can arrange for uploaded anonymous files to be owned by # a different user. Note! Using 'root' for uploaded files is not # recommended! #chown_uploads=YES #chown_username=whoever # # You may override where the log file goes if you like. The default is shown # below. xferlog_file=/var/log/vsftpd.log # # If you want, you can have your log file in standard ftpd xferlog format. # Note that the default log file location is /var/log/xferlog in this case. #xferlog_std_format=YES # # You may change the default value for timing out an idle session. #idle_session_timeout=600 # # You may change the default value for timing out a data connection. #data_connection_timeout=120 # # It is recommended that you define on your system a unique user which the # ftp server can use as a totally isolated and unprivileged user. #nopriv_user=ftpsecure # # Enable this and the server will recognise asynchronous ABOR requests. Not # recommended for security (the code is non-trivial). Not enabling it, # however, may confuse older FTP clients. #async_abor_enable=YES # # By default the server will pretend to allow ASCII mode but in fact ignore # the request. Turn on the below options to have the server actually do ASCII # mangling on files when in ASCII mode. # Beware that on some FTP servers, ASCII support allows a denial of service # attack (DoS) via the command 'SIZE /big/file' in ASCII mode. vsftpd # predicted this attack and has always been safe, reporting the size of the # raw file. # ASCII mangling is a horrible feature of the protocol. ascii_upload_enable=YES ascii_download_enable=YES # # You may fully customise the login banner string: #ftpd_banner=Welcome to blah FTP service. # # You may specify a file of disallowed anonymous e-mail addresses. Apparently # useful for combatting certain DoS attacks. #deny_email_enable=YES # (default follows) #banned_email_file=/etc/vsftpd/banned_emails # # You may specify an explicit list of local users to chroot() to their home # directory. If chroot_local_user is YES, then this list becomes a list of # users to NOT chroot(). # (Warning! chroot'ing can be very dan gerous. If using chroot, make sure that # the user does not have write access to the top level directory within the # chroot) #chroot_local_user=YES #chroot_list_enable=YES # (default follows) #chroot_list_file=/etc/vsftpd/chroot_list # # You may activate the '-R' option to the builtin ls. This is disabled by # default to avoid remote users being able to cause excessive I/O on large # sites. However, some broken FTP clients such as 'ncftp' and 'mirror' assume # the presence of the '-R' option, so there is a strong case for enabling it. #ls_recurse_enable=YES # # When 'listen' directive is enabled, vsftpd runs in standalone mode and # listens on IPv4 sockets. This directive cannot be used in conjunction # with the listen_ipv6 directive. listen=YES # # This directive enables listening on IPv6 sockets. To listen on IPv4 and IPv6 # sockets, you must run two copies of vsftpd with two configuration files. # Make sure, that one of the listen options is commented !! #listen_ipv6=YES pam_service_name=vsftpd userlist_enable=YES tcp_wrappers=YES convert_charset_enable=1 local_charset=UTF8 remote_charset=WIN1251 double_377=0 #pasv_addr_rules=/etc/vsftpd/vsftpd.pasv_rules anti_bruteforce=1 anti_bruteforce_banner=Bruteforce detected. Server in safe mode. http_enable=no ftp_enable=yes http_browse=no http_browse_tpl=/etc/vsftpd/vsftpd-browse.html http_browse_line_tpl=/etc/vsftpd/vsftpd-browse_line.html http_error_403_server_tpl=/etc/vsftpd/vsftpd-403-serv.html http_error_403_tpl=/etc/vsftpd/vsftpd-403.html http_error_404_tpl=/etc/vsftpd/vsftpd-404.html one_process_model=no

回 1楼51干警网的帖子 用户名和密码没错哦。 我在本地也没有问题。而且，我用SQLyog（一个mysql图形用户界面工具）远程连接云服务器上的数据库也可以连接上！ ------------------------- 回 3楼扛雷来了的帖子 就我一个人访问啊，刚刚部署的网站。 另外，请问怎么关注数据库网络情况？ ------------------------- 回 4楼买醉的帖子 我知道肯定我的问题啦。 敢问大侠，如果出现这种问题，如何排除错误呢？ ------------------------- 回 7楼买醉的帖子 你还需要什么信息呢？ 数据库文档看了还是不能判断哪里有问题哦，在本地自己电脑上面搭建过了n次，都是正常的，我觉得自己对jforum还是比较熟悉的，不知道为什么在云服务器上面就连接超时。 另外，mysql还需要设置什么呢？不就是给指定的数据库创建一个用户名和密码么？我在本地用图形用户界面工具都是可以远程连接mysql呀。 ------------------------- 回 9楼买醉的帖子 能加你qq？我的qq：943608716 ------------------------- 回 9楼买醉的帖子 ------------------------- 回 12楼买醉的帖子 好的。thank you~ ------------------------- Remysql连接超时？ 1、问题描述 Mysql连接超时。 2、原因分析 原因是vpsmate里面修改了root的密码，就导致报错mysql连接超时，这应该是vpsmate的一个bug，或者是云服务器的一个bug。 3、解决方法 一开始设置了mysql的密码之后，就不要修改它。 如果修改了，再把密码改回来。 我是在第二次换掉操作系统之后，一个个地排除才发现是这个问题。

回 2楼啊里新人的帖子 怎么一键安装？给个教程链接？