PostgreSQL on Linux 最佳部署手册
作者
digoal
日期
2016-11-21
标签
Linux , PostgreSQL , Install , 最佳部署
背景
数据库的安装一直以来都挺复杂的，特别是Oracle，现在身边都还有安装Oracle数据库赚外快的事情。
PostgreSQL其实安装很简单，但是那仅仅是可用，并不是好用。很多用户使用默认的方法安装好数据库之后，然后测试一通性能，发现性能不行就不用了。
原因不用说，多方面没有优化的结果。
PostgreSQL数据库为了适应更多的场景能使用，默认的参数都设得非常保守，通常需要优化，比如检查点，SHARED BUFFER等。
本文将介绍一下PostgreSQL on Linux的最佳部署方法，其实在我的很多文章中都有相关的内容，但是没有总结成一篇文档。
安装常用包
# yum -y install coreutils glib2 lrzsz mpstat dstat sysstat e4fsprogs xfsprogs ntp readline-devel zlib-devel openssl-devel pam-devel libxml2-devel libxslt-devel python-devel tcl-devel gcc make smartmontools flex bison perl-devel perl-ExtUtils* openldap-devel
配置OS内核参数
# vi /etc/sysctl.conf
# add by digoal.zhou
fs.aio-max-nr = 1048576
fs.file-max = 76724600
kernel.core_pattern= /data01/corefiles/core_%e_%u_%t_%s.%p
# /data01/corefiles事先建好，权限777
kernel.sem = 4096 2147483647 2147483646 512000
# 信号量, ipcs -l 或 -u 查看，每16个进程一组，每组信号量需要17个信号量。
kernel.shmall = 107374182
# 所有共享内存段相加大小限制(建议内存的80%)
kernel.shmmax = 274877906944
# 最大单个共享内存段大小(建议为内存一半), >9.2的版本已大幅降低共享内存的使用
kernel.shmmni = 819200
# 一共能生成多少共享内存段，每个PG数据库集群至少2个共享内存段
net.core.netdev_max_backlog = 10000
net.core.rmem_default = 262144
# The default setting of the socket receive buffer in bytes.
net.core.rmem_max = 4194304
# The maximum receive socket buffer size in bytes
net.core.wmem_default = 262144
# The default setting (in bytes) of the socket send buffer.
net.core.wmem_max = 4194304
# The maximum send socket buffer size in bytes.
net.core.somaxconn = 4096
net.ipv4.tcp_max_syn_backlog = 4096
net.ipv4.tcp_keepalive_intvl = 20
net.ipv4.tcp_keepalive_probes = 3
net.ipv4.tcp_keepalive_time = 60
net.ipv4.tcp_mem = 8388608 12582912 16777216
net.ipv4.tcp_fin_timeout = 5
net.ipv4.tcp_synack_retries = 2
net.ipv4.tcp_syncookies = 1
# 开启SYN Cookies。当出现SYN等待队列溢出时，启用cookie来处理，可防范少量的SYN攻击
net.ipv4.tcp_timestamps = 1
# 减少time_wait
net.ipv4.tcp_tw_recycle = 0
# 如果=1则开启TCP连接中TIME-WAIT套接字的快速回收，但是NAT环境可能导致连接失败，建议服务端关闭它
net.ipv4.tcp_tw_reuse = 1
# 开启重用。允许将TIME-WAIT套接字重新用于新的TCP连接
net.ipv4.tcp_max_tw_buckets = 262144
net.ipv4.tcp_rmem = 8192 87380 16777216
net.ipv4.tcp_wmem = 8192 65536 16777216
net.nf_conntrack_max = 1200000
net.netfilter.nf_conntrack_max = 1200000
vm.dirty_background_bytes = 409600000
# 系统脏页到达这个值，系统后台刷脏页调度进程 pdflush（或其他） 自动将(dirty_expire_centisecs/100）秒前的脏页刷到磁盘
vm.dirty_expire_centisecs = 3000
# 比这个值老的脏页，将被刷到磁盘。3000表示30秒。
vm.dirty_ratio = 95
# 如果系统进程刷脏页太慢，使得系统脏页超过内存 95 % 时，则用户进程如果有写磁盘的操作（如fsync, fdatasync等调用），则需要主动把系统脏页刷出。
# 有效防止用户进程刷脏页，在单机多实例，并且使用CGROUP限制单实例IOPS的情况下非常有效。
vm.dirty_writeback_centisecs = 100
# pdflush（或其他）后台刷脏页进程的唤醒间隔， 100表示1秒。
vm.extra_free_kbytes = 4096000
vm.min_free_kbytes = 2097152
vm.mmap_min_addr = 65536
vm.overcommit_memory = 0
# 在分配内存时，允许少量over malloc, 如果设置为 1, 则认为总是有足够的内存，内存较少的测试环境可以使用 1 .
vm.overcommit_ratio = 90
# 当overcommit_memory = 2 时，用于参与计算允许指派的内存大小。
vm.swappiness = 0
# 关闭交换分区
vm.zone_reclaim_mode = 0
# 禁用 numa, 或者在vmlinux中禁止.
net.ipv4.ip_local_port_range = 40000 65535
# 本地自动分配的TCP, UDP端口号范围
# vm.nr_hugepages = 66536
# 建议shared buffer设置超过64GB时 使用大页，页大小 /proc/meminfo Hugepagesize
配置OS资源限制
# vi /etc/security/limits.conf
* soft nofile 1024000
* hard nofile 1024000
* soft nproc unlimited
* hard nproc unlimited
* soft core unlimited
* hard core unlimited
* soft memlock unlimited
* hard memlock unlimited
配置OS防火墙
（建议按业务场景设置，我这里先清掉）
iptables -F
selinux
如果没有这方面的需求，建议禁用
# vi /etc/sysconfig/selinux
SELINUX=disabled
SELINUXTYPE=targeted
部署文件系统
注意SSD对齐，延长寿命，避免写放大。
parted -s /dev/sda mklabel gpt
parted -s /dev/sda mkpart primary 1MiB 100%
格式化
mkfs.ext4 /dev/sda1 -m 0 -O extent,uninit_bg -E lazy_itable_init=1 -T largefile -L u01
建议使用的ext4 mount选项
# vi /etc/fstab
LABEL=u01 /u01 ext4 defaults,noatime,nodiratime,nodelalloc,barrier=0,data=writeback 0 0
# mount -a
编译器
建议使用较新的编译器，安装 gcc 6.2.0 略
cd ~
tar -jxvf gcc6.2.0.tar.bz2
tar -jxvf python2.7.12.tar.bz2
# vi /etc/ld.so.conf
/home/digoal/gcc6.2.0/lib
/home/digoal/gcc6.2.0/lib64
/home/digoal/python2.7.12/lib
# ldconfig
环境变量
# vi ~/env_pg.sh
export PS1="$USER@`/bin/hostname -s`-> "
export PGPORT=$1
export PGDATA=/$2/digoal/pg_root$PGPORT
export LANG=en_US.utf8
export PGHOME=/home/digoal/pgsql9.6
export LD_LIBRARY_PATH=/home/digoal/gcc6.2.0/lib:/home/digoal/gcc6.2.0/lib64:/home/digoal/python2.7.12/lib:$PGHOME/lib:/lib64:/usr/lib64:/usr/local/lib64:/lib:/usr/lib:/usr/local/lib:$LD_LIBRARY_PATH
export PATH=/home/digoal/gcc6.2.0/bin:/home/digoal/python2.7.12/bin:/home/digoal/cmake3.6.3/bin:$PGHOME/bin:$PATH:.
export DATE=`date +"%Y%m%d%H%M"`
export MANPATH=$PGHOME/share/man:$MANPATH
export PGHOST=$PGDATA
export PGUSER=postgres
export PGDATABASE=postgres
alias rm='rm -i'
alias ll='ls -lh'
unalias vi
编译PostgreSQL
建议使用NAMED_POSIX_SEMAPHORES
. ~/env_pg.sh 1921 u01
cd postgresql-9.6.1
export USE_NAMED_POSIX_SEMAPHORES=1
LIBS=-lpthread CC="/home/digoal/gcc6.2.0/bin/gcc" CFLAGS="-O3 -flto" ./configure --prefix=/home/digoal/pgsql9.6
LIBS=-lpthread CC="/home/digoal/gcc6.2.0/bin/gcc" CFLAGS="-O3 -flto" make world -j 64
LIBS=-lpthread CC="/home/digoal/gcc6.2.0/bin/gcc" CFLAGS="-O3 -flto" make install-world
初始化数据库集群
pg_xlog建议放在IOPS最好的分区。
. ~/env_pg.sh 1921 u01
initdb -D $PGDATA -E UTF8 --locale=C -U postgres -X /u02/digoal/pg_xlog$PGPORT
配置postgresql.conf
以PostgreSQL 9.6, 512G内存主机为例
最佳到文件末尾即可，重复的会以末尾的作为有效值。
$ vi postgresql.conf
listen_addresses = '0.0.0.0'
port = 1921
max_connections = 5000
unix_socket_directories = '.'
tcp_keepalives_idle = 60
tcp_keepalives_interval = 10
tcp_keepalives_count = 10
shared_buffers = 128GB
maintenance_work_mem = 4GB
dynamic_shared_memory_type = posix
vacuum_cost_delay = 0
bgwriter_delay = 10ms
bgwriter_lru_maxpages = 1000
bgwriter_lru_multiplier = 10.0
bgwriter_flush_after = 0
max_parallel_workers_per_gather = 0
old_snapshot_threshold = -1
backend_flush_after = 0
wal_level = replica
synchronous_commit = off
full_page_writes = on
wal_buffers = 1GB
wal_writer_delay = 10ms
wal_writer_flush_after = 0
checkpoint_timeout = 30min
max_wal_size = 256GB
min_wal_size = 64GB
checkpoint_completion_target = 0.05
checkpoint_flush_after = 0
max_wal_senders = 5
random_page_cost = 1.0
parallel_tuple_cost = 0
parallel_setup_cost = 0
min_parallel_relation_size = 0
effective_cache_size = 300GB
force_parallel_mode = off
log_destination = 'csvlog'
logging_collector = on
log_truncate_on_rotation = on
log_checkpoints = on
log_connections = on
log_disconnections = on
log_error_verbosity = verbose
log_timezone = 'PRC'
autovacuum = on
log_autovacuum_min_duration = 0
autovacuum_max_workers = 16
autovacuum_naptime = 15s
autovacuum_vacuum_scale_factor = 0.02
autovacuum_analyze_scale_factor = 0.01
vacuum_freeze_table_age = 1500000000
vacuum_multixact_freeze_table_age = 1500000000
datestyle = 'iso, mdy'
timezone = 'PRC'
lc_messages = 'C'
lc_monetary = 'C'
lc_numeric = 'C'
lc_time = 'C'
default_text_search_config = 'pg_catalog.english'
shared_preload_libraries='pg_stat_statements'
配置pg_hba.conf
避免不必要的访问，开放允许的访问，建议务必使用密码访问。
$ vi pg_hba.conf
host all all 0.0.0.0/0 md5
启动数据库
pg_ctl start
好了，你的PostgreSQL数据库基本上部署好了，可以愉快的玩耍了。
