CentOS安装nexus(Maven仓库管理器)

简介: Nexus是一个强大的Maven仓库管理器,它极大地简化了自己内部仓库的维护和外部仓库的访问。利用Nexus你可以只在一个地方就能够完全控制访问和部署在你所维护仓库中的每个Artifact。Nexus是一套“开箱即用”的系统不需要数据库,它使用文件系统加Lucene来组织数据。Nexus使用ExtJS来开发界面,利用Restlet来提供完整的REST APIs,通过m2eclips
Nexus是一个强大的Maven仓库管理器,
它极大地简化了自己内部仓库的维护和外部仓库的访问。
利用Nexus你可以只在一个地方就能够完全控制访问和部署在你所维护仓库中的每个Artifact。
Nexus是一套“开箱即用”的系统不需要数据库,它使用文件系统加Lucene来组织数据。
Nexus使用ExtJS来开发界面,利用Restlet来提供完整的REST APIs,通过m2eclipse与Eclipse集成使用。
Nexus支持WebDAV与LDAP安全身份认证。

官网下载:http://www.sonatype.org/nexus/archived/

我的准备:

 CentOS Linux release 7.1.1503 (Core)
 nexus-2.11.1-01-bundle.tar.gz
 jdk-8u60-linux-x64

注:最终启动,如果远程访问关闭,或者是stoped的nexus的jre版本和本地jre的version不符合(一般1.7就ok)!

1:解压:

[root@CentOS-Slave1 install-files]# tar zxvf nexus-2.11.1-01-bundle.tar.gz 
-rw-r--r--. 1 root root 71817045 Oct 18 15:17 nexus-2.11.1-01-bundle.tar.gz
drwxr-xr-x. 8 root root     4096 Dec 17  2014 nexus-2.11.1-01
drwxr-xr-x. 3 root root       35 Dec 17  2014 sonatype-work
注:安装nexus,本地仓库默认的jar包存储位置是:/sonatype-work/nexus/storage/central。由于Central仓库占用存储较大,所以要注意存储位置。

2:移动合适位置/home/nexus:

[root@CentOS-Slave1 install-files]# mv nexus-2.11.1-01 /home/nexus/
[root@CentOS-Slave1 install-files]# mv sonatype-work/ /home/nexus
[root@CentOS-Slave1 install-files]# cd /home/nexus/
[root@CentOS-Slave1 nexus]# ll
total 4
drwxr-xr-x. 8 root root 4096 Dec 17  2014 nexus-2.11.1-01
drwxr-xr-x. 3 root root   35 Dec 17  2014 sonatype-work

3:修改配置文件1:/home/nexus/nexus-2.11.1-01/conf/nexus.properties
………………
# Sonatype Nexus
# ==============
# This is the most basic configuration of Nexus.

# Jetty section
# 配置端口信息
application-port=8081
application-host=0.0.0.0
nexus-webapp=${bundleBasedir}/nexus
#配置IP端口访问
#http://192.168.10.56:8081/nexus/可修改为: /
nexus-webapp-context-path=/nexus

# Nexus section
#配置work目录地址,Maven仓库JAR缓存地址,可修改其他地址eg:${bundleBasedir}/nexus-work/nexus 
nexus-work=${bundleBasedir}/../sonatype-work/nexus
runtime=${bundleBasedir}/nexus/WEB-INF
4:修改配置文件2:/home/nexus/nexus-2.11.1-01/bin/nexus
………………
#NEXUS_HOME=".."
#如果目录改变配置,如果修改了运行路径
NEXUS_HOME="/home/nexus/nexus-2.11.1-01"
……………………
#RUN_AS_USER=
#nexus启动用户
RUN_AS_USER=root
注: nexus很依赖于jdk,编写,所以必须安装好jdk并设置环境变量/etc/profile并生效!备注附件!
[root@CentOS-Slave1 metrics]# pwd
/home/nexus/nexus-2.11.1-01/nexus/WEB-INF/classes/org/sonatype/nexus/webapp/metrics
[root@CentOS-Slave1 metrics]# ls
DeadlockHealthCheckProvider.class  HealthCheckMediator.class  MetricsModule$1.class  MetricsModule$2.class  MetricsModule.class
5:启动nexus服务:
[root@CentOS-Slave1 bin]# ./nexus start
****************************************
WARNING - NOT RECOMMENDED TO RUN AS ROOT
****************************************
Starting Nexus OSS...
Started Nexus OSS.
警告:不推荐作为root用户运行.
6:nexus启动日志:
[root@CentOS-Slave1 logs]# pwd
/home/nexus/nexus-2.11.1-01/logs
[root@CentOS-Slave1 logs]# tail -f wrapper.log 
……………………
xceptionMapper
jvm 1    | 2015-10-18 16:38:29,492+0800 INFO  [jetty-main-1] *SYSTEM org.sonatype.nexus.rest.NexusApplication_UriMatching - Strict URI matching: true
jvm 1    | 2015-10-18 16:38:29,816+0800 INFO  [jetty-main-1] *SYSTEM org.sonatype.nexus.configuration.ModelUtils - Loading model /home/nexus/sonatype-work/nexus/conf/ldap.xml
jvm 1    | 2015-10-18 16:38:29,873+0800 INFO  [jetty-main-1] *SYSTEM org.sonatype.nexus.configuration.ModelUtils - Loading model /home/nexus/sonatype-work/nexus/conf/lvo-plugin.xml
jvm 1    | 2015-10-18 16:38:30,994+0800 INFO  [jetty-main-1] *SYSTEM org.sonatype.nexus.webresources.internal.WebResourceServiceImpl - Discovered 1973 resources
jvm 1    | 2015-10-18 16:38:30,996+0800 INFO  [jetty-main-1] *SYSTEM org.sonatype.nexus.webresources.internal.WebResourceServlet - Max-age: 30 days (2592000 seconds)
jvm 1    | 2015-10-18 16:38:31,132+0800 INFO  [jetty-main-1] *SYSTEM org.sonatype.nexus.bootstrap.jetty.InstrumentedSelectChannelConnector - Metrics enabled
jvm 1    | 2015-10-18 16:38:31,166+0800 INFO  [jetty-main-1] *SYSTEM org.eclipse.jetty.server.AbstractConnector - Started InstrumentedSelectChannelConnector@0.0.0.0:8081
jvm 1    | 2015-10-18 16:38:31,166+0800 INFO  [jetty-main-1] *SYSTEM org.sonatype.nexus.bootstrap.jetty.JettyServer - Running
jvm 1    | 2015-10-18 16:38:31,166+0800 INFO  [WrapperListener_start_runner] *SYSTEM org.sonatype.nexus.bootstrap.jetty.JettyServer - Started

注:启动日志:*SYSTEM org.sonatype.nexus.bootstrap.jetty.JettyServer - Started则,启动成功!
用浏览器访问:http://192.168.10.56:8081/nexus/

7:nexus开机启动:

[root@CentOS-Slave1 bin]# pwd
/home/nexus/nexus-2.11.1-01/bin
[root@CentOS-Slave1 bin]# ls
jsw  nexus  nexus.bat
[root@CentOS-Slave1 bin]# cp nexus /etc/rc.d/init.d/
[root@CentOS-Slave1 bin]# cd /etc/rc.d/init.d/
[root@CentOS-Slave1 init.d]# ls
functions  jexec  mysql  netconsole  network  nexus  README
[root@CentOS-Slave1 init.d]# chkconfig --add nexus
[root@CentOS-Slave1 init.d]# chkconfig --list | grep nexus 

Note: This output shows SysV services only and does not include native
      systemd services. SysV configuration data might be overridden by native
      systemd configuration.

      If you want to list systemd services use 'systemctl list-unit-files'.
      To see services enabled on particular target use
      'systemctl list-dependencies [target]'.

nexus          	0:off	1:off	2:off	3:off	4:off	5:off	6:off
[root@CentOS-Slave1 init.d]# chkconfig nexus on
[root@CentOS-Slave1 init.d]# chkconfig --list | grep nexus 

Note: This output shows SysV services only and does not include native
      systemd services. SysV configuration data might be overridden by native
      systemd configuration.

      If you want to list systemd services use 'systemctl list-unit-files'.
      To see services enabled on particular target use
      'systemctl list-dependencies [target]'.

nexus          	0:off	1:off	2:on	3:on	4:on	5:on	6:off

问题1:

[root@CentOS-Slave1 bin]# ./nexus start
****************************************
WARNING - NOT RECOMMENDED TO RUN AS ROOT
****************************************
If you insist running as root, then set the environment variable RUN_AS_USER=root before running this script.

解决1:上:4:修改配置文件2:/home/nexus/nexus-2.11.1-01/bin/nexus ---> RUN_AS_USER=root

备注附件:

安装jdk:

[root@CentOS-Slave1 install-files]# rpm -ivh jdk-8u60-linux-x64.rpm 
Preparing...                          ################################# [100%]
Updating / installing...
   1:jdk1.8.0_60-2000:1.8.0_60-fcs    ################################# [100%]
Unpacking JAR files...
	tools.jar...
	plugin.jar...
	javaws.jar...
	deploy.jar...
	rt.jar...
	jsse.jar...
	charsets.jar...
	localedata.jar...
	jfxrt.jar...
[root@CentOS-Slave1 install-files]# vim /etc/profile
……………………
#jdk
export JAVA_HOME=/usr/java/jdk1.8.0_60
export PATH=$JAVA_HOME/bin:$PATH
export CLASSPATH=$JAVA_HOME/lib:.:$JAVA_HOME/lib/tools.jar:$JAVA_HOME/lib/dt.jar
[root@CentOS-Slave1 install-files]# source /etc/profile

参数说明:

nexus的仓库类型分为以下四种:group: 仓库组,hosted:宿主 ,proxy:代理,virtual:虚拟
仓库组和多个仓库:
Public Repositories:  仓库组
3rd party: 无法从公共仓库获得的第三方发布版本的构件仓库
Apache Snapshots: 用了代理ApacheMaven仓库快照版本的构件仓库
Central: 用来代理maven中央仓库中发布版本构件的仓库
Central M1 shadow: 用于提供中央仓库中M1格式的发布版本的构件镜像仓库
Codehaus Snapshots: 用来代理CodehausMaven 仓库的快照版本构件的仓库
Releases: 用来部署管理内部的发布版本构件的宿主类型仓库
Snapshots:用来部署管理内部的快照版本构件的宿主类型仓库
maven的pom.xml设置:

<?xml version="1.0" encoding="UTF-8"?>
<settings>
	<mirrors>
		<mirror>
			<!--This sends everything else to /public -->
			<id>nexus</id>
			<mirrorOf>*</mirrorOf>
			 <!-- <url>http://repo1.maven.org/maven2/</url> -->
			<url>http://192.168.10.56:8081/nexus/content/groups/public</url>
		</mirror>
	</mirrors>
	<profiles>
		<profile>
			<id>nexus</id>
			<!--Enable snapshots for the built in central repo to direct -->
			<!--all requests to nexus via the mirror -->
			<repositories>
				<repository>
		    <id>central</id>
		    <url>http://repo1.maven.org/maven2/</url>
					<releases>
						<enabled>true</enabled>
					</releases>
					<snapshots>
						<enabled>true</enabled>
					</snapshots>
				</repository>
			</repositories>
			<pluginRepositories>
				<pluginRepository>
					<id>central</id>
					<url>http://central</url>
					<releases>
						<enabled>true</enabled>
					</releases>
					<snapshots>
						<enabled>true</enabled>
					</snapshots>
				</pluginRepository>
			</pluginRepositories>
		</profile>
	</profiles>
	
	<activeProfiles>
		<!--make the profile active all the time -->
		<activeProfile>nexus</activeProfile>
	</activeProfiles>
</settings>

目录
相关文章
|
10天前
|
缓存 Linux 数据库
CentOS 8中 更新或下载时报错:为仓库 ‘appstream‘ 下载元数据失败 : Cannot prepare internal
通过以上步骤,您可以有效地解决 CentOS 8 中“为仓库 ‘appstream’ 下载元数据失败 : Cannot prepare internal”问题。关键在于检查网络连接、更新和切换仓库配置、清理缓存、重建 RPM 数据库以及在必要时临时禁用有问题的仓库。通过这些方法,可以确保系统能够正常进行软件包的更新和下载操作。
70 20
|
23天前
|
存储 分布式计算 Hadoop
Centos7.9安装kerberos
Centos7.9安装kerberos
73 25
|
18天前
|
存储 Shell 网络安全
Centos7.9安装openldap
Centos7.9安装openldap
43 16
|
19天前
|
数据可视化 Linux 应用服务中间件
Centos7.9安装phpldapadmin
Centos7.9安装phpldapadmin
44 15
|
22天前
|
网络协议 Java 应用服务中间件
centos7环境下tomcat8的安装与配置
本文介绍了在Linux环境下安装和配置Tomcat 8的详细步骤。首先,通过无网络条件下的文件交互软件(如Xftp 6或MobaXterm)下载并解压Tomcat安装包至指定路径,启动Tomcat服务并测试访问。接着,修改Tomcat端口号以避免冲突,并部署Java Web应用项目至Tomcat服务器。最后,调整Linux防火墙规则,确保外部可以正常访问部署的应用。关键步骤包括关闭或配置防火墙、添加必要的端口规则,确保Tomcat服务稳定运行。
|
2月前
|
存储 Java Linux
【Maven】——基础入门,插件安装、配置和简单使用,Maven如何设置国内源
Maven插件安装,Maven项目构建,依赖管理,Haven Help插件,Maven仓库,Maven如何设置国内源
|
3月前
|
SQL 存储 Linux
从配置源到数据库初始化一步步教你在CentOS 7.9上安装SQL Server 2019
【11月更文挑战第16天】本文介绍了在 CentOS 7.9 上安装 SQL Server 2019 的详细步骤,包括配置系统源、安装 SQL Server 2019 软件包以及数据库初始化,确保 SQL Server 正常运行。
139 4
|
3月前
|
SQL 存储 Linux
从配置源到数据库初始化一步步教你在CentOS 7.9上安装SQL Server 2019
【11月更文挑战第8天】本文介绍了在 CentOS 7.9 上安装 SQL Server 2019 的详细步骤,包括系统准备、配置安装源、安装 SQL Server 软件包、运行安装程序、初始化数据库以及配置远程连接。通过这些步骤,您可以顺利地在 CentOS 系统上部署和使用 SQL Server 2019。
160 1
|
4月前
|
Linux 网络安全 数据安全/隐私保护
Linux系统之Centos7安装cockpit图形管理界面
【10月更文挑战第12天】Linux系统之Centos7安装cockpit图形管理界面
164 1
Linux系统之Centos7安装cockpit图形管理界面
|
3月前
|
SQL 存储 Linux
从配置源到数据库初始化一步步教你在CentOS 7.9上安装SQL Server 2019
【11月更文挑战第7天】本文介绍了在 CentOS 7.9 上安装 SQL Server 2019 的详细步骤,包括系统要求检查与准备、配置安装源、安装 SQL Server 2019、配置 SQL Server 以及数据库初始化(可选)。通过这些步骤,你可以成功安装并初步配置 SQL Server 2019,进行简单的数据库操作。