转载地址：https://www.cnblogs.com/kevingrace/p/5821450.html
centos7.2部署vnc服务记录
不做过多介绍了，下面直接记录下centos7系统下安装配置vncserver的操作记录
1）关闭防火墙
centos的防火墙是firewalld，关闭防火墙的命令
[root@localhost ~]# systemctl stop firewalld.service #停止firewall
[root@localhost ~]# systemctl disable firewalld.service #禁止firewall开机启动
[root@localhost ~]# setenforce 0
[root@localhost ~]# getenforce
[root@localhost ~]# cat /etc/sysconfig/selinux
SELINUX=disabled
SELINUXTYPE=targeted
2）安装软件：
[root@localhost ~]# yum update
[root@localhost ~]# yum groupinstall "GNOME Desktop" "X Window System" "Desktop"
[root@localhost ~]# yum install tigervnc-server tigervnc vnc vnc-server
3）配置vnc连接
[root@localhost ~]# cp /lib/systemd/system/vncserver@.service /etc/systemd/system/vncserver@:1.servicebr/>修改/etc/systemd/system/vncserver@:1.service
<="" a="" data-filtered="filtered" style="margin: 0px; padding: 0px; max-width: 100%;"> 找到这一行
ExecStart=/sbin/runuser -l <USER> -c "/usr/bin/vncserver %i"
PIDFile=/home/<USER>/.vnc/%H%i.pid
这里直接用root 用户登录，所以我替换成
ExecStart=/sbin/runuser -l root -c "/usr/bin/vncserver %i"
PIDFile=/root/.vnc/%H%i.pid
如果是其他用户的话比如john替换如下
ExecStart=/sbin/runuser -l john -c "/usr/bin/vncserver %i"
PIDFile=/home/john/.vnc/%H%i.pid
由于直接root用户登录，所以配置如下：
[root@localhost ~]# cat /etc/systemd/system/vncserver@:1.service
.........
[Unit]
Description=Remote desktop service (VNC)
After=syslog.target network.target
[Service]
Type=forking
Clean any existing files in /tmp/.X11-unix environment
ExecStartPre=/bin/sh -c '/usr/bin/vncserver -kill %i > /dev/null 2>&1 || :'
ExecStart=/usr/sbin/runuser -l root -c "/usr/bin/vncserver %i"
PIDFile=/root/.vnc/%H%i.pid
ExecStop=/bin/sh -c '/usr/bin/vncserver -kill %i > /dev/null 2>&1 || :'
[Install]
WantedBy=multi-user.target
为VNC设密码
[root@localhost ~]# vncpasswd
123456
[root@localhost ~]# vim /etc/libvirt/qemu.conf
vnc_password = "123456"
vnc_listen = "0.0.0.0"
重加载 systemd
[root@localhost ~]# systemctl daemon-reload
启动vnc
[root@localhost ~]# systemctl enable vncserver@:1.service
[root@localhost ~]# systemctl start vncserver@:1.service
注意，此处关闭了防火墙
如果防火墙开了，需要开通一下规则：
[root@localhost ~]# firewall-cmd --permanent --add-service vnc-server
[root@localhost ~]# systemctl restart firewalld.service
如果是iptable，则需要在/etc/sysconfig/iptables里添加：
-A INPUT -m state --state NEW -m tcp -p tcp --dport 5900:5903 -j ACCEPT
关闭vnc连接
[root@localhost ~]# /usr/bin/vncserver -kill :1
测试vnc连接：
[root@localhost ~]# novnc_server --vnc 192.168.1.8:5901 --listen 6081
Warning: could not find self.pem
Starting webserver and WebSockets proxy on port 6081
WebSocket server settings:
- Listen on :6081
- Flash security policy server
- Web server. Web root: /usr/share/novnc
- No SSL/TLS support (no cert file)
- proxying from :6081 to 192.168.1.8:5901
Navigate to this URL:
http://kvm-server:6081/vnc.html?host=kvm-server&port=6081 #http访问方式
Press Ctrl-C to exit
由于kvm-server的主机名对于ip是112.112.113.56，所以在浏览器里输入：
http://112.112.113.56:6081/vnc.html?host=112.112.113.56&port=6081
本文转自027ryan 51CTO博客，原文链接：http://blog.51cto.com/ucode/2063692，如需转载请自行联系原作者
