title: MSSQL-最佳实践-数据库备份链

author: 风移

摘要

在SQL Server备份专题分享中，前两期我们分享了三种常见的备份以及备份策略的制定，在第三期分享中，我们将要分享SQL Server的数据库备份链。完整的数据库备份链是保证数据库能够实现灾难恢复的基础，如果备份链条被打断或者备份链条上的文件损坏，势必会导致数据恢复不完整或者不能满足预期，而造成数据丢失，危害数据完整性生命线，后果非常严重。所以，理解SQL Server数据库备份链非常重要。
MSSQL· 最佳实践· SQL Server三种常见备份
 MSSQL · 最佳实践 · SQL Server备份策略

场景引入

在开始今天关于SQL Server数据库备份链的分享之前，我们还是以上一期SQL Server备份策略分享的场景引入。假设我们存在如下图所示的备份文件列表，为什么我们就可以使用“全备 + 差备 + 日志备份”来实现快速的数据库还原操作呢？我们又是如何快速的查找到TestDR数据库的备份链条，并以此来还原的呢？这两个话题是我们今天要解答和解决的。
TestDR数据库备份文件列表如下图所示：

LSN介绍

在解决今天的问题之前，我需要首先介绍一个非常重要的概念：LSN。SQL Server的每一个事务日志都有自己的唯一标识号Log Sequence Number(简写为LSN)。LSN会随着时间的推移和事务日志的产生而不断增大。那么在SQL Server中如何查看以及有几种类型的LSN呢？

备份文件LSN

在SQL Server中，查看备份的LSN非常简单，我们可以使用RESTORE HEADERONLY命令跟上备份文件路径，即可查看。

RESTORE HEADERONLY FROM DISK='C:\Temp\TestDR_20171217@00:00_FULL.bak'
RESTORE HEADERONLY FROM DISK='C:\Temp\TestDR_20171217@01:00_LOG.trn'

执行的展示结果如下：

LSN种类

从以上截图红色方框中我们可以看出来，SQL Server的LSN分为以下四类：
FirstLSN：备份集中第一个事务日志的LSN；
LastLSN：备份集中最后一个事务日志的下一个LSN；
CheckpointLSN：最后一个Checkpoint发生时的LSN；
DatabaseBackupLSN：最后一个FULL Backup备份的LSN。

备份链原理

LSN是查找SQL Server 数据库备份链不可或缺的神一般存在的关键信息。我们可以利用前面讲到的四类LSN，使用如下五步骤来实现SQL Server备份链的查找。
获取Full Backup: 查找最新一个FULL Backup文件，拿到对应CheckpointLSN；
获取Diff Backup：查找Diff Backup文件，Diff Backup文件的DatabaseBackupLSN等于第一步中的CheckpointLSN，如果有多个Diff Backup文件，取FirstLSN最大者，然后拿到相应LastLSN；
获取第一个Log Backup：查找第二步中的LastLSN位于Log Backup文件的FirstLSN和LastLSN之间的Log Backup，并获取相应的LastLSN；
获取下一个Log Backup: 下一个Log Backup文件的FirstLSN等于第三步中获取到额LastLSN；
获取第N个Log Backup：按照步骤四中的方法查找，直到所有日志文件查找完毕后，一个完整的备份链条查找完毕。
以上的理论解释稍显枯燥，我们用具体的示例来解释，就显得更为丰满和易于理解。我们把“场景引入”中的十五个备份文件，参照“备份文件LSN”中的方法来获取到LSN，如下面的截图所示：

那么，TestDR数据库的备份链可以通过如下的方法来查找：
获取Full Backup: 查找最新一个FULL Backup（BackType=1）文件，拿到CheckpointLSN：24000000012800197，图中红色方框标示；
获取Diff Backup：查找Diff Backup（BackType=5）文件，Diff Backup文件的DatabaseBackupLSN等于第一步中的CheckpointLSN:24000000012800197，图中黄色方框标示，取FirstLSN最大者: 24000000037600007，然后拿到LastLSN: 24000000039200001；
获取第一个Log Backup：查找第二步中的LastLSN（24000000039200001）位于Log Backup（BackType=5）的FirstLSN（24000000036800001）与LastLSN（24000000040000001）之间的Log Backup，如图中绿色方框标示，并获取到LastLSN：24000000040000001；
获取下一个Log Backup: 下一个Log Backup文件的FirstLSN（24000000040000001）应该等于上一步获取到额LastLSN，如图中粉红色标示；
获取第N个Log Backup：按照步骤四中的方法查找，直到所有日志文件查找完毕。
所以，我们最终获取到的TestDR数据库的最简单，快速恢复的备份链是：C:TempTestDR_20171217@00:00_FULL.bak => C:TempTestDR_20171217@12:00_DIFF.bak => C:TempTestDR_20171217@13:00_LOG.trn => C:TempTestDR_20171217@14:00_LOG.trn。这个链条和我们上一期分享的数据库备份文件还原操作是完全吻合的。

具体实现

在“备份链原理”章节中，我们找出备份链是通过“用眼睛看”的查找方式来实现的。但是现实中如果数据库实例众多，数据库纷繁复杂，用眼睛看的方法就显得低效而准确率不高。那么，如何实现数据库备份链的自动查找呢？不着急，我已经为大家写好了，你只需要把相同数据库的多个备份文件路径放入输入参数中，我们就非常轻松、快捷的查找到数据库的备份链，并以此为依据来还原数据库。还是以TestDR的十五个备份文件为例来查找备份链条，代码如下：

USE master
GO


SET NOCOUNT ON
DECLARE
-- all the backup files
    @backup_file_list NVARCHAR(MAX) = N'
C:\Temp\TestDR_20171217@00:00_FULL.bak
C:\Temp\TestDR_20171217@01:00_LOG.trn
C:\Temp\TestDR_20171217@02:00_LOG.trn
C:\Temp\TestDR_20171217@03:00_LOG.trn
C:\Temp\TestDR_20171217@04:00_LOG.trn
C:\Temp\TestDR_20171217@05:00_LOG.trn
C:\Temp\TestDR_20171217@06:00_DIFF.bak
C:\Temp\TestDR_20171217@07:00_LOG.trn
C:\Temp\TestDR_20171217@08:00_LOG.trn
C:\Temp\TestDR_20171217@09:00_LOG.trn
C:\Temp\TestDR_20171217@10:00_LOG.trn
C:\Temp\TestDR_20171217@11:00_LOG.trn
C:\Temp\TestDR_20171217@12:00_DIFF.bak
C:\Temp\TestDR_20171217@13:00_LOG.trn
C:\Temp\TestDR_20171217@14:00_LOG.trn
'
;

-- Create temp table to save headeronly info
IF OBJECT_ID('tempdb..#headeronly') IS NOT NULL
    DROP TABLE #headeronly
CREATE TABLE #headeronly(
    RowId INT IDENTITY(1,1) NOT NULL PRIMARY KEY
    ,BackupName    nvarchar(128) NULL
    ,BackupDescription    nvarchar(255) NULL    
    ,BackupType    smallint  NULL
    ,ExpirationDate    datetime
    ,Compressed    bit  NULL
    ,Position    smallint  NULL    
    ,DeviceType    tinyint     NULL
    ,UserName    nvarchar(128)  NULL    
    ,ServerName    nvarchar(128)  NULL    
    ,DatabaseName    nvarchar(128)  NULL
    ,DatabaseVersion    int      NULL
    ,DatabaseCreationDate    datetime  NULL
    ,BackupSize    numeric(20,0)  NULL
    ,FirstLSN    numeric(25,0)  NULL
    ,LastLSN    numeric(25,0)  NULL
    ,CheckpointLSN    numeric(25,0)  NULL
    ,DatabaseBackupLSN    numeric(25,0)  NULL
    ,BackupStartDate    datetime  NULL
    ,BackupFinishDate    datetime  NULL
    ,SortOrder    smallint  NULL
    ,CodePage    smallint  NULL
    ,UnicodeLocaleId    int  NULL
    ,UnicodeComparisonStyle    int  NULL
    ,CompatibilityLevel    tinyint  NULL
    ,SoftwareVendorId    int  NULL
    ,SoftwareVersionMajor    int  NULL
    ,SoftwareVersionMinor    int  NULL
    ,SoftwareVersionBuild    int  NULL
    ,MachineName    nvarchar(128)  NULL
    ,Flags    int  NULL
    ,BindingID    uniqueidentifier  NULL
    ,RecoveryForkID    uniqueidentifier  NULL
    ,Collation    nvarchar(128)  NULL
    ,FamilyGUID    uniqueidentifier  NULL
    ,HasBulkLoggedData    bit  NULL
    ,IsSnapshot    bit  NULL
    ,IsReadOnly    bit  NULL
    ,IsSingleUser    bit  NULL
    ,HasBackupChecksums    bit  NULL
    ,IsDamaged    bit  NULL
    ,BeginsLogChain    bit  NULL
    ,HasIncompleteMetaData    bit  NULL
    ,IsForceOffline    bit  NULL
    ,IsCopyOnly    bit  NULL
    ,FirstRecoveryForkID    uniqueidentifier   NULL
    ,ForkPointLSN    numeric(25,0) NULL
    ,RecoveryModel    nvarchar(60)  NULL
    ,DifferentialBaseLSN    numeric(25,0)  NULL
    ,DifferentialBaseGUID    uniqueidentifier  NULL
    ,BackupTypeDescription    nvarchar(60)  NULL
    ,BackupSetGUID    uniqueidentifier NULL
    ,CompressedBackupSize    bigint  NULL
);

-- private variables
DECLARE
    @backup_file_list_xml xml
    ,@backup_file sysname
    ,@row_count int
    ,@do int = 0
    ,@sql NVARCHAR(MAX) = N''
    ,@full_backup_CheckPointLSN numeric(25,0)
    ,@full_backup_familyGUID uniqueidentifier
    ,@diff_backup_LastLSN numeric(25,0)
    ,@log_backup_LastLSN numeric(25,0)
    ,@back_chain_level_number INT = 0
    ,@full_backup_rowid INT
    ,@diff_backup_rowid INT
;

SELECT
    @backup_file_list_xml = '<V><![CDATA[' + REPLACE(
                                                    REPLACE(
                                                                REPLACE(
                                                                            @backup_file_list,CHAR(10),']]></V><V><![CDATA['
                                                                        ),',',']]></V><V><![CDATA['
                                                            ),CHAR(13),']]></V><V><![CDATA['
                                                  ) + ']]></V>'
;

DECLARE
    @tb_back_files TABLE(
    Rowid INT IDENTITY(1,1) NOT NULL PRIMARY KEY,
    backup_file sysname not null
);

DECLARE
    @tb_back_file_rowid TABLE(
    Bak_row_id INT NOT NULL,
    Level_Number INT NOT NULL
);

-- split backup files into @table
INSERT INTO @tb_back_files
SELECT 
    DISTINCT    
    backup_file = RTRIM(LTRIM(T.C.value('(./text())[1]','sysname'))) 
FROM @backup_file_list_xml.nodes('./V') AS T(C)
WHERE T.C.value('(./text())[1]','sysname') IS NOT NULL
    AND LEFT(RTRIM(LTRIM(T.C.value('(./text())[1]','sysname'))), 2) <> '--'
ORDER BY 1 ASC

-- cursor for each backup file to get headeronly info 
DECLARE CUR_backup_file CURSOR LOCAL STATIC READ_ONLY FORWARD_ONLY
FOR
SELECT     
     backup_file
FROM @tb_back_files
ORDER BY Rowid ASC

OPEN CUR_backup_file
FETCH NEXT FROM CUR_backup_file INTO @backup_file

SET @row_count = @@CURSOR_ROWS

WHILE @@FETCH_STATUS = 0
BEGIN
    RAISERROR('--=== %d/%d ===Processing on %s', 10, 1, @do, @row_count, @backup_file) WITH NOWAIT
    SET
        @sql = N'RESTORE HEADERONLY FROM DISK = N' + QUOTENAME(@backup_file, '''') + N';'
    ; 
    INSERT INTO #headeronly
    EXEC sys.sp_executesql @sql
    ;

    SET @do = @do + 1
    FETCH NEXT FROM CUR_backup_file INTO @backup_file
END

CLOSE CUR_backup_file
DEALLOCATE CUR_backup_file

/**
* FULL backup file checking
*1. make sure those backup files came from the same database.
*2. there is  no full backup
*3. There have more than one FULL backup files.
*/
-- make sure backup files came from the same database.
IF EXISTS(
    SELECT TOP 1 1
    FROM #headeronly
    GROUP BY FamilyGUID
    HAVING COUNT(DISTINCT FamilyGUID) >= 2
)
BEGIN
    RAISERROR('Those backup fils didn''t backup from the same database, process terminated.', 16, 1) WITH NOWAIT
    RETURN
END

-- There is no full backup file
IF NOT EXISTS(
    SELECT TOP 1 1
    FROM #headeronly
    WHERE BackupType = 1 -- FULL Backup
)
BEGIN
    RAISERROR('There is no FULL BACKUP included, process terminated.', 16, 1) WITH NOWAIT
    RETURN
END

-- Have more than one FULL Backup, we don't know use which one.
IF EXISTS(
    SELECT TOP 1 1
    FROM #headeronly
    WHERE BackupType = 1
    GROUP BY BackupType
    HAVING COUNT(1) >= 2
)
BEGIN
    RAISERROR('Those backup fils are more than one FULL BACKUP including, we may don''t know use which one, process terminated.', 16, 1) WITH NOWAIT
    RETURN
END

-- We have only one full backup, get FULL Backup file CheckPointLSN
SELECT TOP 1 
    @full_backup_CheckPointLSN = CheckPointLSN
    ,@full_backup_familyGUID = FamilyGUID
    ,@back_chain_level_number = 0
    ,@full_backup_rowid = RowId
FROM #headeronly
WHERE BackupType = 1

INSERT INTO @tb_back_file_rowid
SELECT @full_backup_rowid, @back_chain_level_number;

PRINT 'We got full backup check point LSN: ' + cast(@full_backup_CheckPointLSN as varchar)


/**
*get the very last diff backup file
**/
-- if exists diff backup, get the newest one whose DatabaseBackupLSN equals @full_backup_CheckPointLSN got above
IF EXISTS(
    SELECT TOP 1 1
    FROM #headeronly
    WHERE BackupType = 5 -- DIFF Backup
        AND DatabaseBackupLSN = @full_backup_CheckPointLSN
        AND FamilyGUID = @full_backup_familyGUID
)
BEGIN
    RAISERROR('We are searching the Differential Database Backup.', 10, 1) WITH NOWAIT

    SELECT TOP 1 
        @diff_backup_LastLSN = LastLSN
        ,@back_chain_level_number = @back_chain_level_number + 1
        ,@diff_backup_rowid = RowId
    FROM #headeronly
    WHERE BackupType = 5 -- DIFF Backup
        AND DatabaseBackupLSN = @full_backup_CheckPointLSN
        AND FamilyGUID = @full_backup_familyGUID
    ORDER BY FirstLSN DESC -- get the max firstLSN (means newest one)

    INSERT INTO @tb_back_file_rowid
    SELECT @diff_backup_rowid, @back_chain_level_number;

    PRINT 'We got newest Differential backup Last LSN: ' + cast(@diff_backup_LastLSN as varchar)
END
ELSE
    RAISERROR('We didn''t find any differential backups yet match the full backup.', 10, 1) WITH NOWAIT

-- get the very first log backup whose FirstLSN littler and LastLSN greater than @diff_backup_LastLSN 
-- when exists differential backup
IF @diff_backup_LastLSN IS NOT NULL
BEGIN
    IF EXISTS(
        SELECT TOP 1 1 
        FROM #headeronly
        WHERE BackupType = 2 -- Log backup
            AND FirstLSN <@diff_backup_LastLSN
            AND LastLSN>= @diff_backup_LastLSN
            AND FamilyGUID = @full_backup_familyGUID
    )
    BEGIN
        SELECT TOP 1 
            @log_backup_LastLSN = LastLSN
            ,@back_chain_level_number = @back_chain_level_number + 1
        FROM #headeronly
        WHERE BackupType = 2
            AND FirstLSN <@diff_backup_LastLSN
            AND LastLSN>= @diff_backup_LastLSN
            AND FamilyGUID = @full_backup_familyGUID

        PRINT 'We got log backup Last LSN: ' + cast(@log_backup_LastLSN as varchar)
    END
END
ELSE
-- There is no differential backup, we have to find between log backups.
-- Find the very first log backup LastLSN
BEGIN
    SELECT TOP 1 
        @log_backup_LastLSN = LastLSN
        ,@back_chain_level_number = @back_chain_level_number + 1
    FROM #headeronly
    WHERE BackupType = 2 -- Log Backup
        AND FamilyGUID = @full_backup_familyGUID
        AND DatabaseBackupLSN = @full_backup_CheckPointLSN
        AND FirstLSN = @full_backup_CheckPointLSN
END

-- There is no log backup belongs to this full backup
IF @log_backup_LastLSN IS NULL
BEGIN
    RAISERROR('There is no any log backups belong to this full backup.', 10, 1) WITH NOWAIT
    RETURN
END

--SELECT 
--    full_backup_CheckPointLSN = @full_backup_CheckPointLSN
--    ,diff_backup_LastLSN = @diff_backup_LastLSN    
--    ,log_backup_LastLSN = @log_backup_LastLSN
--    ,back_chain_level_number = @back_chain_level_number
--;

-- find out all the log backup need to be restore
;
WITH backup_files
AS
(
    SELECT lv = @back_chain_level_number,*
    FROM #headeronly
    WHERE LastLSN = @log_backup_LastLSN
        AND FamilyGUID = @full_backup_familyGUID
    UNION ALL
    SELECT bf.lv + 1,lg.*
    FROM #headeronly AS lg
        INNER JOIN backup_files as bf
        ON lg.FirstLSN = bf.LastLSN AND lg.FamilyGUID = bf.FamilyGUID
    WHERE lg.BackupType = 2
        AND lg.FamilyGUID = @full_backup_familyGUID
)

INSERT INTO @tb_back_file_rowid
SELECT RowId, lv FROM backup_files

SELECT 
    bkf.Backup_file, 
    hd.BackupType,
    BackupTypeDescription = 
        CASE hd.BackupType
            WHEN 1 THEN 'FULL'
            WHEN 2 THEN 'LOG'
            WHEN 5 THEN 'DIFF'
            ELSE ''
        END,
    hd.IsDamaged,
    restore_order = bkr.Level_Number 
FROM @tb_back_file_rowid AS bkr
    INNER JOIN @tb_back_files AS bkf
    ON bkr.Bak_row_id = bkf.Rowid
    INNER  JOIN #headeronly AS hd
    ON bkr.Bak_row_id = hd.RowId
ORDER BY bkr.Level_Number

--SELECT * 
--FROM #headeronly
--ORDER BY rowid asc

SELECT 
    bkf.backup_file,
    hd.BackupType, 
    hd.Compressed, 
    hd.DatabaseName, 
    hd.FirstLSN, 
    hd.LastLSN, 
    hd.CheckpointLSN, 
    hd.DatabaseBackupLSN, 
    hd.IsDamaged, 
    hd.BackupTypeDescription
FROM #headeronly AS hd
    INNER JOIN @tb_back_files AS bkf
    ON hd.RowId = bkf.Rowid
ORDER BY hd.RowId

备份链结果截图展示如下：

从这个截图中，restore_order和Backup_file字段可以很清楚的看到数据库还原的顺序，以及相应的备份文件路径。所有备份文件的LSN分布如下截图：

差异备份文件损坏

从备份链条我们发现，12:00的这个差异备份C:TempTestDR_20171217@12:00_DIFF.bak非常关键，假设现实中，我们发现这个文件恰恰损坏掉了，那么我们的可以实现应用的数据库还原吗？答案是肯定的，我们把刚才的脚本输入参数修改如下：

DECLARE
-- all the backup files
    @backup_file_list NVARCHAR(MAX) = N'
C:\Temp\TestDR_20171217@00:00_FULL.bak
C:\Temp\TestDR_20171217@01:00_LOG.trn
C:\Temp\TestDR_20171217@02:00_LOG.trn
C:\Temp\TestDR_20171217@03:00_LOG.trn
C:\Temp\TestDR_20171217@04:00_LOG.trn
C:\Temp\TestDR_20171217@05:00_LOG.trn
C:\Temp\TestDR_20171217@06:00_DIFF.bak
C:\Temp\TestDR_20171217@07:00_LOG.trn
C:\Temp\TestDR_20171217@08:00_LOG.trn
C:\Temp\TestDR_20171217@09:00_LOG.trn
C:\Temp\TestDR_20171217@10:00_LOG.trn
C:\Temp\TestDR_20171217@11:00_LOG.trn
C:\Temp\TestDR_20171217@13:00_LOG.trn
C:\Temp\TestDR_20171217@14:00_LOG.trn
'
;

得到如下备份还原链条：

从这个结果，我们可以看到，系统选择了06:00这个差异备份文件，然后一步步使用接下来的事务日志备份文件进行还原。

最后总结

本期是SQL Server备份专题的第三期，在前两期基础上分享了如何通过备份文件查找SQL Server数据库备份链，并以此来还原数据库的理论方法和具体实现，可以帮助用户实现简单、快速查找数据库备份还原链条。

MSSQL - 最佳实践 - 数据库备份链

author: 风移

摘要

场景引入

LSN介绍

备份文件LSN

LSN种类

备份链原理

具体实现

差异备份文件损坏

最后总结

热门文章

最新文章

相关课程

相关电子书

相关实验场景

热门

活动广场

任务中心

开发者评测

高校计划

乘风者计划

训练营

阿里云MVP

话题

直播

下载

镜像站

技术资料

插件

MSSQL - 最佳实践 - 数据库备份链

author: 风移

摘要

场景引入

LSN介绍

备份文件LSN

LSN种类

备份链原理

具体实现

差异备份文件损坏

最后总结

热门文章

最新文章

相关课程

相关电子书

相关实验场景