Motorola VMIVME-7452 单插槽 VMEbus 软盘/硬盘模块

简介: VMIVME-7452 是一款无源 VMEbus 板卡,配有一个 3.5" 1.44 MB 软驱和一个硬盘,还可选配一个闪存驱动器。它采用标准 6U 单插槽外形尺寸,功耗低。设计兼容 VMIC 的 VMEbus PC/AT SBC 板卡(兼容型号请参阅规格书)。规格包括闪存驱动器的尺寸(160 x 233.25 x 20.32 毫米)、环境温度范围和数据传输速率。电源要求为 +5 V、最大 2.5 A(启动)和通常 1.0 A。电路板还列出了兼容附件和相关产品,包括输入/输出模块、充电控制器和通信板。

• Optional Flash drive

• 3.5-inch 1.44 Mbyte floppy drive

• Standard VMEbus 6U single-slot form factor

• Low power

INTRODUCTION —

The VMIVME-7452 is a passive board that holds one floppy and one hard drive with an optional Flash drive available.

The board is a 6U VMEbus form factor, deriving its power from the standard VMEbus P1 and P2.

The VMIVME-7452 has been designed to interface to VMIC’s line of VMEbus-compatible PC/AT SBC boards.

These SBC boards incorporate the floppy and IDE controllers on-board. Refer to the compatible SBC list in this specification.

SPECIFICATIONS

Physical Dimensions: Standard VME double height Eurocard (one slot)

160 x 233.25 x 20.32 mm

User Connectors: 34-pin floppy drive 40-pin IDE

Ambient Temperature:

All Disks: 5 to 50 ˚C, operating

Storage: -25 to 60 ˚C

Rate: 20 ˚C per hr maximum

Humidity: 20 to 80 percent, noncondensing, maximum

wet bulb 29 ˚C

Hard Drive Access Time:

Average Access Time: 14 ms

Average Latency: 6.67 ms

Power Requirements:

+5 V, 2.5 A maximum (spinup)

<1.0 A typical

Flash Drive System Performance:

Data Transfer Rate to Flash: 4.0 Mbyte/s burst

Data Transfer Rate from Flash: 6.0 Mbyte/s burst

Sleep to Write: 2.5 ms maximum

Sleep to Read: 2.0 ms maximum

Reset to Ready: 50 ms, typical, 400 ms, maximum

Flash Drive System Performance:

DC Input Voltage (Commercial): 5 V ±10%,

3.3 V ±5%

Power Consumption:

Sleep: 200 µA at 3.3 V, 500 µA at 5.0 V

Read: 32 to 80 mA at 3.3 V, 46 to 120 mA at 5.0 V

Write: 32 to 80 mA at 3.3 V, 46 to 120 mA at 5.0 V

Compatible SBC Boards:

VMIVME-7591 VMIVME-7698

VMIVME-7592 VMIVME-7740

VMIVME-7695 VMIVME-7750

VMIVME-7697 VMIVME-7751

VMIVME-7697A VMIVME-7765

Related Products:

IC660TBA026M Current Source Analog Input I/O Block and Accessory Kit

IC660TBD024K Genius I/O Terminal Assembly Module

IC660TBD025 Genius I/O Terminal Assembly Module

BSFC-02C Charge Controller Universal Brake Chopper

C150/0000/STD DIN Universal Process Indicator

C1627A Silicon NPN Transistor Bus Manager Module

DS200LDCCH1AGA Drive Control/LAN Communication Board

DS200LDCCH1ALA Drive Control/LAN Communication Board

1B30035H01 Process control base

IC687BEM713B Fanuc90-70 Series Bus Transmitter Unit

1756-DMF30 Drive Module

1756-DNB Communication Module

相关文章
|
8月前
|
存储 IDE 开发工具
硬盘驱动程序设计
硬盘驱动程序设计
104 0
|
存储 Ubuntu Linux
嵌入式Linux系列第5篇:Nand Flash根文件系统制作
嵌入式Linux系列第5篇:Nand Flash根文件系统制作
|
缓存
计算机硬件之硬盘和内存条
计算机硬件之硬盘和内存条
546 0
|
安全 数据安全/隐私保护
S140阵列卡看不到磁盘解决
本文基于Dell PowerEdge R340服务器,RAID阵列卡使用S140(这里S表示软件)为例。
1125 0
|
存储 缓存 IDE
自制操作系统Antz day04——进入保护模式 (下) 实现内核并从硬盘载入
目前已经完成了MBR的雏形,并且直接操作显卡完成了屏幕的内容显示。接下来我们要改造之前的MBR,做一个大的改进,使MBR可以读取硬盘,因为我们的MBR受限制于512字节大小,在这么小的空间里没法为内核准备好环境,更不要说加载内核到内存中并运行了,所以我们需要在另一个程序中完成初始化环境与加载内核的任务,这个程序我们叫做loader。
1535 0