[DPDK] 发arp包

简介: [DPDK] 发arp包

arp.c

#include <rte_eal.h>
#include <rte_ethdev.h>
#include <rte_mbuf.h>
#include <stdio.h>
#include <arpa/inet.h>
#define ENABLE_SEND   1
#define ENABLE_ARP    1
#define NUM_MBUFS (4096-1)
#define BURST_SIZE  32
#if ENABLE_SEND
#define MAKE_IPV4_ADDR(a, b, c, d) (a + (b<<8) + (c<<16) + (d<<24))
static uint32_t gLocalIp = MAKE_IPV4_ADDR(192, 168, 222, 92);
static uint32_t gSrcIp; //
static uint32_t gDstIp;
static uint8_t gSrcMac[RTE_ETHER_ADDR_LEN];
static uint8_t gDstMac[RTE_ETHER_ADDR_LEN];
static uint16_t gSrcPort;
static uint16_t gDstPort;
#endif
int gDpdkPortId = 0;
static const struct rte_eth_conf port_conf_default = {
  .rxmode = {.max_rx_pkt_len = RTE_ETHER_MAX_LEN }
};
static void ng_init_port(struct rte_mempool *mbuf_pool) {
  uint16_t nb_sys_ports= rte_eth_dev_count_avail(); //
  if (nb_sys_ports == 0) {
    rte_exit(EXIT_FAILURE, "No Supported eth found\n");
  }
  struct rte_eth_dev_info dev_info;
  rte_eth_dev_info_get(gDpdkPortId, &dev_info); //
  const int num_rx_queues = 1;
  const int num_tx_queues = 1;
  struct rte_eth_conf port_conf = port_conf_default;
  rte_eth_dev_configure(gDpdkPortId, num_rx_queues, num_tx_queues, &port_conf);
  if (rte_eth_rx_queue_setup(gDpdkPortId, 0 , 1024, 
    rte_eth_dev_socket_id(gDpdkPortId),NULL, mbuf_pool) < 0) {
    rte_exit(EXIT_FAILURE, "Could not setup RX queue\n");
  }
#if ENABLE_SEND
  struct rte_eth_txconf txq_conf = dev_info.default_txconf;
  txq_conf.offloads = port_conf.rxmode.offloads;
  if (rte_eth_tx_queue_setup(gDpdkPortId, 0 , 1024, 
    rte_eth_dev_socket_id(gDpdkPortId), &txq_conf) < 0) {
    rte_exit(EXIT_FAILURE, "Could not setup TX queue\n");
  }
#endif
  if (rte_eth_dev_start(gDpdkPortId) < 0 ) {
    rte_exit(EXIT_FAILURE, "Could not start\n");
  }
}
static int ng_encode_udp_pkt(uint8_t *msg, unsigned char *data, uint16_t total_len) {
  // encode 
  // 1 ethhdr
  struct rte_ether_hdr *eth = (struct rte_ether_hdr *)msg;
  rte_memcpy(eth->s_addr.addr_bytes, gSrcMac, RTE_ETHER_ADDR_LEN);
  rte_memcpy(eth->d_addr.addr_bytes, gDstMac, RTE_ETHER_ADDR_LEN);
  eth->ether_type = htons(RTE_ETHER_TYPE_IPV4);
  // 2 iphdr 
  struct rte_ipv4_hdr *ip = (struct rte_ipv4_hdr *)(msg + sizeof(struct rte_ether_hdr));
  ip->version_ihl = 0x45;
  ip->type_of_service = 0;
  ip->total_length = htons(total_len - sizeof(struct rte_ether_hdr));
  ip->packet_id = 0;
  ip->fragment_offset = 0;
  ip->time_to_live = 64; // ttl = 64
  ip->next_proto_id = IPPROTO_UDP;
  ip->src_addr = gSrcIp;
  ip->dst_addr = gDstIp;
  ip->hdr_checksum = 0;
  ip->hdr_checksum = rte_ipv4_cksum(ip);
  // 3 udphdr 
  struct rte_udp_hdr *udp = (struct rte_udp_hdr *)(msg + sizeof(struct rte_ether_hdr) + sizeof(struct rte_ipv4_hdr));
  udp->src_port = gSrcPort;
  udp->dst_port = gDstPort;
  uint16_t udplen = total_len - sizeof(struct rte_ether_hdr) - sizeof(struct rte_ipv4_hdr);
  udp->dgram_len = htons(udplen);
  rte_memcpy((uint8_t*)(udp+1), data, udplen);
  udp->dgram_cksum = 0;
  udp->dgram_cksum = rte_ipv4_udptcp_cksum(ip, udp);
  struct in_addr addr;
  addr.s_addr = gSrcIp;
  printf(" --> src: %s:%d, ", inet_ntoa(addr), ntohs(gSrcPort));
  addr.s_addr = gDstIp;
  printf("dst: %s:%d\n", inet_ntoa(addr), ntohs(gDstPort));
  return 0;
}
static struct rte_mbuf * ng_send_udp(struct rte_mempool *mbuf_pool, uint8_t *data, uint16_t length) {
  // mempool --> mbuf
  const unsigned total_len = length + 42;
  struct rte_mbuf *mbuf = rte_pktmbuf_alloc(mbuf_pool);
  if (!mbuf) {
    rte_exit(EXIT_FAILURE, "rte_pktmbuf_alloc\n");
  }
  mbuf->pkt_len = total_len;
  mbuf->data_len = total_len;
  uint8_t *pktdata = rte_pktmbuf_mtod(mbuf, uint8_t*);
  ng_encode_udp_pkt(pktdata, data, total_len);
  return mbuf;
}
#if ENABLE_ARP
static int ng_encode_arp_pkt(uint8_t *msg, uint8_t *dst_mac, uint32_t sip, uint32_t dip) {
  // 1 ethhdr
  struct rte_ether_hdr *eth = (struct rte_ether_hdr *)msg;
  rte_memcpy(eth->s_addr.addr_bytes, gSrcMac, RTE_ETHER_ADDR_LEN);
  rte_memcpy(eth->d_addr.addr_bytes, dst_mac, RTE_ETHER_ADDR_LEN);
  eth->ether_type = htons(RTE_ETHER_TYPE_ARP);
  // 2 arp 
  struct rte_arp_hdr *arp = (struct rte_arp_hdr *)(eth + 1);
  arp->arp_hardware = htons(1);
  arp->arp_protocol = htons(RTE_ETHER_TYPE_IPV4);
  arp->arp_hlen = RTE_ETHER_ADDR_LEN;
  arp->arp_plen = sizeof(uint32_t);
  arp->arp_opcode = htons(2);
  rte_memcpy(arp->arp_data.arp_sha.addr_bytes, gSrcMac, RTE_ETHER_ADDR_LEN);
  rte_memcpy( arp->arp_data.arp_tha.addr_bytes, dst_mac, RTE_ETHER_ADDR_LEN);
  arp->arp_data.arp_sip = sip;
  arp->arp_data.arp_tip = dip;
  return 0;
}
static struct rte_mbuf *ng_send_arp(struct rte_mempool *mbuf_pool, uint8_t *dst_mac, uint32_t sip, uint32_t dip) {
  const unsigned total_length = sizeof(struct rte_ether_hdr) + sizeof(struct rte_arp_hdr);
  struct rte_mbuf *mbuf = rte_pktmbuf_alloc(mbuf_pool);
  if (!mbuf) {
    rte_exit(EXIT_FAILURE, "rte_pktmbuf_alloc\n");
  }
  mbuf->pkt_len = total_length;
  mbuf->data_len = total_length;
  uint8_t *pkt_data = rte_pktmbuf_mtod(mbuf, uint8_t *);
  ng_encode_arp_pkt(pkt_data, dst_mac, sip, dip);
  return mbuf;
}
#endif
int main(int argc, char *argv[]) {
  if (rte_eal_init(argc, argv) < 0) {
    rte_exit(EXIT_FAILURE, "Error with EAL init\n");
  }
  struct rte_mempool *mbuf_pool = rte_pktmbuf_pool_create("mbuf pool", NUM_MBUFS,
    0, 0, RTE_MBUF_DEFAULT_BUF_SIZE, rte_socket_id());
  if (mbuf_pool == NULL) {
    rte_exit(EXIT_FAILURE, "Could not create mbuf pool\n");
  }
  ng_init_port(mbuf_pool);
  rte_eth_macaddr_get(gDpdkPortId, (struct rte_ether_addr *)gSrcMac);
  while (1) {
    struct rte_mbuf *mbufs[BURST_SIZE];
    unsigned num_recvd = rte_eth_rx_burst(gDpdkPortId, 0, mbufs, BURST_SIZE);
    if (num_recvd > BURST_SIZE) {
      rte_exit(EXIT_FAILURE, "Error receiving from eth\n");
    }
    unsigned i = 0;
    for (i = 0;i < num_recvd;i ++) {
      struct rte_ether_hdr *ehdr = rte_pktmbuf_mtod(mbufs[i], struct rte_ether_hdr*);
#if ENABLE_ARP
      if (ehdr->ether_type == rte_cpu_to_be_16(RTE_ETHER_TYPE_ARP)) {
        struct rte_arp_hdr *ahdr = rte_pktmbuf_mtod_offset(mbufs[i], 
          struct rte_arp_hdr *, sizeof(struct rte_ether_hdr));
        struct in_addr addr;
        addr.s_addr = ahdr->arp_data.arp_tip;
        printf("arp ---> src: %s ", inet_ntoa(addr));
        addr.s_addr = gLocalIp;
        printf(" local: %s \n", inet_ntoa(addr));
        if (ahdr->arp_data.arp_tip == gLocalIp) {
          struct rte_mbuf *arpbuf = ng_send_arp(mbuf_pool, ahdr->arp_data.arp_sha.addr_bytes, 
            ahdr->arp_data.arp_tip, ahdr->arp_data.arp_sip);
          rte_eth_tx_burst(gDpdkPortId, 0, &arpbuf, 1);
          rte_pktmbuf_free(arpbuf);
          rte_pktmbuf_free(mbufs[i]);
        }
        continue;
      } 
#endif
      if (ehdr->ether_type != rte_cpu_to_be_16(RTE_ETHER_TYPE_IPV4)) {
        continue;
      }
      struct rte_ipv4_hdr *iphdr =  rte_pktmbuf_mtod_offset(mbufs[i], struct rte_ipv4_hdr *, 
        sizeof(struct rte_ether_hdr));
      if (iphdr->next_proto_id == IPPROTO_UDP) {
        struct rte_udp_hdr *udphdr = (struct rte_udp_hdr *)(iphdr + 1);
#if ENABLE_SEND //
        rte_memcpy(gDstMac, ehdr->s_addr.addr_bytes, RTE_ETHER_ADDR_LEN);
        rte_memcpy(&gSrcIp, &iphdr->dst_addr, sizeof(uint32_t));
        rte_memcpy(&gDstIp, &iphdr->src_addr, sizeof(uint32_t));
        rte_memcpy(&gSrcPort, &udphdr->dst_port, sizeof(uint16_t));
        rte_memcpy(&gDstPort, &udphdr->src_port, sizeof(uint16_t));
#endif
        uint16_t length = ntohs(udphdr->dgram_len);
        *((char*)udphdr + length) = '\0';
        struct in_addr addr;
        addr.s_addr = iphdr->src_addr;
        printf("src: %s:%d, ", inet_ntoa(addr), ntohs(udphdr->src_port));
        addr.s_addr = iphdr->dst_addr;
        printf("dst: %s:%d, %s\n", inet_ntoa(addr), ntohs(udphdr->dst_port), 
          (char *)(udphdr+1));
#if ENABLE_SEND
        struct rte_mbuf *txbuf = ng_send_udp(mbuf_pool, (uint8_t *)(udphdr+1), length);
        rte_eth_tx_burst(gDpdkPortId, 0, &txbuf, 1);
        rte_pktmbuf_free(txbuf);
#endif
        rte_pktmbuf_free(mbufs[i]);
      }
    }
  }
}


相关文章
|
6月前
|
缓存 网络协议
Wireshark中的ARP协议包分析
Wireshark可以跟踪网络协议的通讯过程,本节通过ARP协议,在了解Wireshark使用的基础上,重温ARP协议的通讯过程。 ARP(Address Resolution Protocol)地址解析协议,是根据IP地址获取物理地址的一个TCP/IP协议。 主机发送信息时将包含目标IP地址的ARP请求广播到局域网络上的所有主机,并接收返回消息,以此确定目标的物理地址;收到返回消息后将该IP地址和物理地址存入本机ARP缓存中并保留一定时间,下次请求时直接查询ARP缓存以节约资源。 在Wireshark界面,我们可以看到19、20号数据包,就是一对标准的ARP请求和响应包。
|
6月前
|
缓存 网络协议 网络架构
【计算机网络】第三章 数据链路层(MAC地址 IP地址 ARP协议)
【计算机网络】第三章 数据链路层(MAC地址 IP地址 ARP协议)
118 1
|
8天前
|
网络协议 安全 NoSQL
网络空间安全之一个WH的超前沿全栈技术深入学习之路(8-2):scapy 定制 ARP 协议 、使用 nmap 进行僵尸扫描-实战演练、就怕你学成黑客啦!
scapy 定制 ARP 协议 、使用 nmap 进行僵尸扫描-实战演练等具体操作详解步骤;精典图示举例说明、注意点及常见报错问题所对应的解决方法IKUN和I原们你这要是学不会我直接退出江湖;好吧!!!
网络空间安全之一个WH的超前沿全栈技术深入学习之路(8-2):scapy 定制 ARP 协议 、使用 nmap 进行僵尸扫描-实战演练、就怕你学成黑客啦!
|
1月前
|
缓存 网络协议 Linux
Python渗透测试之ARP毒化和协议应用
Python渗透测试之ARP毒化和协议应用
|
3月前
|
网络协议
用户态协议栈04-定时arp-table的实现
用户态协议栈04-定时arp-table的实现
|
3月前
|
缓存 网络协议
用户态协议栈02-arp reply实现
用户态协议栈02-arp reply实现
|
3月前
|
网络协议 安全 网络安全
ARP协议详解及其工作原理
【8月更文挑战第31天】
94 0
|
3月前
|
存储 缓存 监控