Tests run: 1, Failures: 0, Errors: 1, Skipped: 0, Time elapsed: 4.323 s <<< FAILURE - in com.hao.ma

简介: 操作如下

解决方案:

2345_image_file_copy_782.jpg

双击clean–》单击“闪电”–》双击install

2345_image_file_copy_783.jpg

目录
相关文章
|
4月前
|
Linux 开发工具
You could try using --skip-broken to work around the problem You could try running: rpm -Va --nofi
linux配置环境变量操作失误出现:/usr/libexec/grepconf.sh: line 5: grep: command not found 的解决办法
100 2
|
6月前
|
C语言 C++
关于DEV中collect2.exe [Error] ld returned 1 exit status的问题解决!!!
关于DEV中collect2.exe [Error] ld returned 1 exit status的问题解决!!!
Error running Application. Command line is too long.
【2月更文挑战第2天】Error running Application. Command line is too long. 问题处理
|
前端开发 安全
| ERROR: [2] bootstrap checks failed. You must address the points described in the following [2] lin
| ERROR: [2] bootstrap checks failed. You must address the points described in the following [2] lin
651 0
|
数据安全/隐私保护
Do Sync Disk 0 Part 0 Failed, code=S3_F42, msg=Sync Failed after retry 5 times
Do Sync Disk 0 Part 0 Failed, code=S3_F42, msg=Sync Failed after retry 5 times
186 1
成功解决Failed to execute stage ‘Setup validation’: Cannot locate gluster packages
成功解决Failed to execute stage ‘Setup validation’: Cannot locate gluster packages
|
Unix Linux 异构计算
成功解决 ERROR: An error occurred while performing the step: “Building kernel modules“. See /var/log/nv
成功解决 ERROR: An error occurred while performing the step: “Building kernel modules“. See /var/log/nv
成功解决 ERROR: An error occurred while performing the step: “Building kernel modules“. See  /var/log/nv
|
网络安全 开发工具
【解决方案】A session ended very soon after starting. Check that the command in profile “XXX” is correct.
【解决方案】A session ended very soon after starting. Check that the command in profile “XXX” is correct.
1004 0
【解决方案】A session ended very soon after starting. Check that the command in profile “XXX” is correct.
Execution failed for task :Test:lintVitalRelease/Lint found fatal errors while assembling a release
Execution failed for task :Test:lintVitalRelease/Lint found fatal errors while assembling a release
120 0
未解决:dpkg-source: error: aborting due to unexpected upstream changes, see /tmp/-1.diff.rm5mTN
未解决:dpkg-source: error: aborting due to unexpected upstream changes, see /tmp/-1.diff.rm5mTN
122 0